Summary of Contents for DSM omnicabsim
- Page 2 DSM Noisemaker OmniCabsim Tweakable Cabinet Simulator Thank you for purchasing the best cabinet simulator available. This device will help you to achieve the sound of standard cabinets and further, allowing you to tune the characteristics of a speaker and cabinet to your own taste, and not being limited by presets of classic, common cabinets.
- Page 3 Controls: Gain: The gain control has a 0 to +12 dB of gain. It is used to compensate when the input level is too low. It is recommended to keep the gain low and the input signal strong to improve Signal/Noise ratio. Hi Response: This controls the high end roll off point of the speaker simulation.
- Page 4 Mid Response: Controls the 450 Hz band response. Different kind of speakers shows a distinct response around this band. Punch: This one boosts the 800 Hz band, when you need more presence and punch on your sound to cut through the mix.
- Page 5 Connections: IMPORTANT: THIS IS NOT A POWER ATTENUATOR, DO NOT CONNECT TO THE POWER OUTPUT OF AN AMPLIFIER!! DSM Noisemaker www.dsmnoisemaker.com www.facebook.com/dsmnoisemaker Designed and made in Chile...