Table 3: Sbg6900-Ac Rear Panel Ports & Connectors - Arris SURFboard SBG6900-AC User Manual

Product Overview
Port
Reset Button
SURFboard® SBG6900-AC Wireless Cable Modem & Router • User Guide
365-095-27293 x.1
Table 3: SBG6900-AC Rear Panel Ports & Connectors
Description
Recessed button used to reboot the gateway or reset the gateway
factory settings.
• To reboot (or restart) the gateway, press the indented Reset
button once using the end of a paper clip or other small object
with a narrow tip, and then release.
• To reset the gateway configuration back to the factory default
settings, press and hold the recessed Reset button for 15
seconds using the end of a paper clip or other small object with a
narrow tip, and then release. See
more information on an alternative method to reset the gateway
settings using the SBG6900-AC Web Manager.
WARNING! Resetting the SBG6900-AC to factory defaults will also
delete any custom gateway configurations, including your user
passwords and other security settings. You should back up the
gateway configuration files before resetting the gateway. See
Up Your Gateway Configuration
USB 2.0 port connection to your computer or other USB device
Four one-gigabit Ethernet ports for RJ-45 cable connections
Green
• LED is ON - Indicates a data transfer rate of one gigabit
per second
Amber
LED is ON - Indicates a data transfer rate of less than
•
one gigabit per second
Coaxial cable connector
100 - 240VAC Power connector
WARNING!
To avoid any damage to your SBG6900-AC, only use
the power cord provided in the box.
Copyright 2015 ARRIS Enterprises, Inc. All Rights Reserved.
Reset Your Gateway Settings
for more information.
for
Back
6