Wireless Charging; Onstar With 4G Lte; Memory Seats - Cadillac 2015 CTS Convenience/Personalization Manual

WIRELESS CHARGING♦

The Dockspot wireless charging system is located in the storage
compartment behind the climate controls. To check mobile device
compatibility, visit www.gmtotalconnect.com.
1. The vehicle must be On or Retained Accessory Power must
be active.
2. Remove all objects from the charging pad.
3. Place the mobile device face up on the symbol on the
charging pad.
4. Move the device slowly until the battery charging symbol displays
on the CUE touch screen, indicating the device is charging.

ONSTAR WITH 4G LTE

If equipped with OnStar 4G LTE and Wi-Fi, up to seven devices
(smartphones, tablets and laptops) can be connected to high-
speed Internet through the vehicle's built-in Wi-Fi
To retrieve the SSID and password for the hotspot, press the
OnStar Voice Command button on the overhead console or
rearview mirror, wait for the prompt, and then say "Wi-Fi set-
tings." The information will be displayed on the screen.
For assistance or to change the SSID and password, press the
blue OnStar button or call 1-888-4-ONSTAR (1-888-466-7827) to
connect to an OnStar Advisor.
Note: See onstar.com for a detailed instruction guide, vehicle availability,
details, and system limitations. Services and apps vary by make, model,
year, carrier, availability, and conditions. 4G LTE service is available in
select markets. 4G LTE performance is based on industry averages and
vehicle systems design. Some services require a data plan.
See your CUE Infotainment System Manual.
® hotspot.
See your CUE Infotainment System Manual.

MEMORY SEATS

Set Memory Positions
1. Adjust the driver's seat, power outside mirrors and the power
steering column to the desired positions.
2. Press and release the SET button and then press and hold
button 1 on the driver's door until a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Set Exit Position
1. Adjust the driver's seat, power outside mirrors and the power
steering column to the desired positions.
2. Press and release the SET button and then press and hold the
Exit button on the driver's door until a beep sounds.
Manually Recall Positions
At any time, press and hold button 1, 2 or
position is reached. Releasing the button before the stored
position is reached stops the recall.
With the vehicle in Park and the ignition ON, press and release
button 1, 2 or to recall the stored position.
Note: To change the Auto Memory Recall settings, go to Comfort and
Convenience in the Vehicle Settings menu.
14
until the stored
See Seats and Restraints in your Owner Manual.