Door Opener - Mitel Superset 4025 User Manual

To monitor a a call:
1. Lift the handset.
2. Dial 45 followed by the number of the extension you wish to monitor.
If the user is on a call, INTRUDING followed by the user's extension
number appears in your telephone display.
If the user is not on the phone, you hear busy tone and the user's
extension number followed by the words IS IDLE are shown in your
telephone display.
3. Press Trans/Conf to form a three-party conference with the user and
the other party.
-OR-
Press Exit to end the monitoring session.
NOTE: If you wish to continue monitoring after exiting the conference, you
must set up the monitor again.

Door Opener

Door Opener allows you to operate a third-party door opener. For example,
when someone requires entry into a third-party building, a designated
extension (or extensions) rings and on answering, the extension user can
press a feature key or dial a feature access code to open the door.
To use Door Opener:
Press Door Opener or press 66.
!
-43-