Tv Camport Auto Sense Operation - LG 42LG710H Owner's Manual

TV CAMPORT AUTO SENSE OPERATION

The CAMPORT Auto Sense function is enabled when:
1. Installer Menu Item 34, CAMPORT EN is set to 1 AND
2. Installer Menu Item 40, AUTO CAMPORT is enabled (1).
Selectable= Can be accessed with INPUT key, direct access,
etc.
Auto Sense= Switches to this input when connector is insert-
ed.
The camport (Side Video) has the highest priority and will
override any commands including tuning to the Start Channel.
CAMPORT Operation (Stand-Alone)
When Camport Auto Sense is enabled as above, the TV's
source will switch to the side video aux source whenever a
plug is inserted into any of the side video panel inputs
(either composite Video or S-Video).
When the plug is removed, the TV will switch back to the
previous channel or input source that the TV was using
before the plug was inserted. However, if any direct access
to an RF channel or Aux channel is requested while the cam-
port is active, then, when the camport plug is removed, the
TV will switch to the last requested channel. Source changes
using any Source Keys (INPUT) are ignored. Channel
Up/Channel Down and Flashback Commands are not direct
access tuning commands and they are also ignored.
CAMPORT Operation (PPV)
The operation will be similar to that of the Stand-
Alone mode. However, the PPV providers may send dif-
ferent commands to the TV for the same user com-
mands. For instance, some providers will always send a
direct tune command when it receives a channel
up/down or a flashback command while other PPV
providers will just send a key command.
CAMPORT (Front Video) Functionality Control
Item 34 Item 40
CAMPORT EN AUTO CAMPORT
0
0
1
1
Previous State Operation
Before Inserting While CAMPORT
CAMPORT Is Active
Aux or RF Channel None
Aux or RF Channel Direct Access
Aux or RF Channel Ch Up/Down,
Flashback
and TV/AV Keys
Previous State Operation
Before Inserting While CAMPORT
CAMPORT Is Active
Aux or RF Channel None
Aux or RF Channel Direct Access
Aux or RF Channel Ch Up/Down,
Flashback
and TV/AV Keys
Front Video
Operation
0 Disabled
1 Disabled
0 Selectable
1 Auto Sense
State
Upon Removal
Of CAMPORT
Previous Aux
or RF Channel
Last Requested
RF or Aux Channel
Previous Aux
or RF Channel
State
Upon Removal
Of CAMPORT
Previous Aux
or RF Channel
Last Requested RF
or Aux Channel
Last Requested
Channel if PPV
translates it to
direct access tuning
command. Otherwise,
goes to Previous Aux
or RF Channel
117