Philips DVD707 Service Manual page 4

DISMANTLING INSTRUCTIONS DVD707/
See exploded view for item numbers
Front assy 200
Remove 2 screws 212
(front to frame)
Unlock front from frame by
releasing successively snaps
Place front assy in front of
the set (service position)
Display board 1004
Remove 7 screws 211
(board to front), pay attention
to the earth spring 252
Demount board
751/781/782
Cover 232
Remove 7 screws 233
Lift cover at rearside to remove
Loader module 1005
Remove connections to
MPEG and PSU board
Remove 4 screws 217
(loader to frame)
Demount loader module
Switch assy 8008
Remove 2 screws 211
Demount switch assy
Mounting
Demounting
MPEG board 1002
PSU board 1001
Remove flex connections to Remove flex connections to
MPEG board PSU board
Remove 5 screws 227 Remove 1 screws 228
(MPEG board to back plate) (PSU board to back plate)
Remove the screw 255 Remove 3 screws 222
(MPEG board to frame) (PSU board to frame)
Release the snap of spacer Release the snap of spacer
254 (board to frame) 226 (board to frame)
Demount board Demount board