Sound Adjustment; Clock And Timer - Panasonic sc-all5cd Operating Instructions Manual

Sound adjustment

The following sound effects can be added to the audio
output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [3, 4] to select the setting and then press
[OK].
"PRESET EQ" "HEAVY" (heavy), "SOFT" (soft),
(Preset Equalizer) "CLEAR" (clear), "VOCAL"
(vocal) or "FLAT" (flat/off).
≥ The factory default is "HEAVY".
"BASS" (Bass) or Adjust the level (j4 to i4).
"TREBLE" (Treble)
"D.BASS" "ON D.BASS" or "OFF D.BASS".
(Dynamic Bass) ≥ The factory default is
"ON D.BASS".
"SURROUND" "ON SURROUND" or
(Surround) "OFF SURROUND".
≥ The factory default is
"OFF SURROUND".
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
≥ When "AUX" is selected as the source, you can select
"INPUT LEVEL" to adjust the sound input level of the
external device. (l 5)

Clock and Timer

Setting the clock
This is a 24-hour clock.
1
Press [SETUP] repeatedly to select "CLOCK".
2
Press [3, 4] to set the time and then press [OK].
≥ To display the clock, press [SETUP] repeatedly to select
"CLOCK" and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [DISPLAY] once. The time is
displayed for approx. 10 seconds and then the display
disappears.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
Play timer
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
1
Press [SETUP] repeatedly to select "TIMER ADJ".
2
Press [3, 4] to set the starting time ("ON TIME")
and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
4
Press [3, 4] to select the music source* and then
press [OK].
Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [SETUP] repeatedly to select "TIMER SET".
3
Press [3, 4] to select "SET" and then press [OK].
≥ The play timer indicator "F" lights up.
≥ To turn the timer off, select "OFF".
4
Press [Í] to turn the unit to standby mode.
≥ To display the timer settings, press [SETUP] repeatedly to
select "TIMER ADJ" and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
≥ During standby, if the timer is turned on, press [DISPLAY]
twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
* "CD", "USB", "DAB+" and "FM" can be set as the music
source.
Sleep timer
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select "SLEEP".
2
Press [3, 4] to set the time (in minutes) and then
press [OK].
"SLEEP 30" ,. "SLEEP 60" ,. "SLEEP 90" ,. "SLEEP 120"
^------------------.
"OFF" (Cancel)
≥ The remaining time is indicated on the unit's display except
when other operations are performed.
≥ The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
(------------------J
17
RQT0A22