Automatic Transmission Fluid - Acura MDX 2008 Owner's Manual

Hide thumbs Also See for MDX 2008:
Table of Contents

Advertisement

Main Menu
The transmission should be drained
and refilled with new fluid when this
service is shown on a maintenance
message in the multi-information
display.
Check the fluid level with the engine
at normal operating temperature.
1.
Park the vehicle on level ground.
Start the engine, let it run until the
radiator fan comes on, then shut
off the engine. For accurate
results, wait about 60 seconds (but
no longer than 90 seconds) before
doing step 2.
Table Of Contents
2.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.

Automatic Transmission Fluid

DIPSTICK
3.
Insert the dipstick all the way into
the transmission securely as
shown in the illustration.
4.
Remove the dipstick and check
the fluid level. It should be
between the upper and lower
marks.
DIPSTICK
UPPER MARK
LOWER MARK
CONTINUED
399

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents