Operating Miomap (Controls); Hardware Buttons; Power On/Off; Screen Buttons And Controls - Mio MIOMAP C220 User Manual

3 Operating MioMap (Controls)

MioMap is designed for easy operation. All controls are operable by fingertips.
Wherever possible, pushbuttons and lists are provided to make accessing functions
or changing settings as easy as possible.

3.1 Hardware buttons

There is only one hardware button on your Mio DigiWalker C220.
The majority of the MioMap functions can be accessed using the touch screen. The
hardware buttons are the following:

3.1.1 Power on/off

Use this button to turn the power of the Mio DigiWalker C220 on or off any time.
When you turn the device back on, MioMap will continue the navigation as soon as
the built-in GPS determines the location again.
While the device is switched off, the GPS will not work, no position will be calculated,
track log will not be saved, and navigation will stop.

3.2 Screen buttons and controls

The primary input channel of MioMap is the touch screen. If you read on, you will
realise that most parts of the screen are not only used to display information but also
to initiate functions by tapping. Below you will find a list of the most frequently used
controls in the program.

3.2.1 Direct selectors

Some of the settings can be chosen from a short list of possible values. If the values
can be described graphically, all values are available on the screen.