Daylight / Night Colour Profile; Show Street Labels; Textured Polygons; Smart Zoom - Mio Digi Walker C510 User Manual

6.5.4.1 Daylight / Night colour profile

MioMap comes with different colour schemes for both daylight and night use. There
is always one selected daytime scheme and one selected night-time scheme.
MioMap uses these when switching from day to night and back.
Tap the appropriate button and select a new scheme from the list.

6.5.4.2 Show Street Labels

You can set whether or not to see the names of the streets and the POI icons on the
map when driving. Based on the current zoom and tilt levels, street names are
displayed either aligned with the street or on signposts stuck into the streets (Page
16). If you switch these signs on, it will be easier to recognise your location on the
map, if you turn them off, it will be easier to see the road geometry.
Note: You can only disable street names and POI icons if MioMap follows your
position. As soon as you move the map and Lock-to-Position (Page 22) is disabled,
street names and icons become visible again. Tap Lock to re-enable Lock-to-
Position and have the labels and icons disappear again.

6.5.4.3 Textured Polygons

Enable textured polygons, and have rivers, lakes, forests and other large objects
displayed in a more realistic and attractive way on the map.
Disabling it will lead to uniform areas but better performance. See Page 17.

6.5.5 Smart Zoom

Smart zoom is a lot more than just a usual automatic zoom.
While navigating a route: when approaching a turn, it will zoom in and raise the
view angle to let you easily recognise your manoeuvre at the next junction. If the
next turn is at a distance, it will zoom out and lower the view angle to be flat in order
to let you see the road in front of you, or it can even switch to an Overview mode to
let you follow your position on the map.
While cruising: if there is no active route and you are just driving, Smart Zoom will
zoom in if you drive slowly and zoom out when you drive at high speed.
76