Kicking; Pre-Programmed Acrobatics - Parrot JETT User Manual

Kicking

Set the MiniDrone to Kicker position to push an object away.
Before pushing an object away the spring of the MiniDrone needs to be
compressed. This compression may be performed just before kicking in which
case a delay of several seconds is necessary before executing.
You also have the option of anticipating the kick by dragging the
to compress the spring, while continuing to use the MiniDrone. Once the cursor
has returned to its original position you will be able to push the object away
without delay. To do so:
1. Ensure that the pad of the MiniDrone is in contact with the object to be kicked.
2. Press .
The Kick function is prohibited as soon as you take hold of the MiniDrone .

Pre-programmed acrobatics

Press to display the list of pre-programmed acrobatics.
Icon Name
Boost
Spin
Tap
Slow shake
Metronome The MiniDrone rotates on its axis to the right, then to the
Ondulation
Spin Jump
Slalom
Press the corresponding icon to launch the acrobatic you want.
Description
The MiniDrone accelerates
The MiniDrone rotates on its axis for 2 seconds
The MiniDrone tapes its jump spring on the floor
The MiniDrone executes a quarter turn to the right, then to
the left, then right
left
The MiniDrone performs an auto-balance position then
returns to normal position
The MiniDrone rotates on its axis, then perform a jump
The MiniDrone slaloms
key to the left
Piloting 9