Printing On Envelopes - Minolta PAGEWORKS 20 User Manual

Printing on Envelopes

- Tray 1 only.
- The following lists the envelope sizes you can specify from the
control panel or printer driver.
ISO B5
COM10 (Commercial-10)
C5
DL
Monarch
- Select the envelope size you want to print in the tray1 paper size
setting mode.
See "Tray 1 Paper Size Setting Method" page 3-2.
- Load envelopes face up.
- The top edge of the envelopes should be loaded facing the left
paper guide plate.
- Specify envelope as the media type from the control panel.
See "Understanding the Printer Menus" page 3-11.
- Do not specify duplex printing.
Note the following points whenever printing on envelopes.
Make sure that all edges are created sharply and that all flaps are
folded correctly.
Do not use envelopes that are self-adhesive. Use only envelopes
that have standard adhesive that sticks after it is moistened.
Use envelopes whose flaps run the entire length of the envelope.
Envelopes that seal at on end will not feed properly.
Do not use envelopes that have a window. Such envelopes can
seriously damage the printer.
Do not use envelopes that are wrinkled.
Never use envelopes that have clasps or any other type of fastener
that can damage the printer.
Do not store envelopes in an area that is subject to high humidity.
3. Loading Paper
(176mm x 250mm)
(4.125" x 9.5")
(162mm x 229mm)
(110mm x 220mm)
(3.875" x 7.5")
3-25