Operation - Echo ES-250 SHRED ‘N’ VAC Operator's Manual

OPERATION

2. Align locking ribs (A) on elbow pipe with recesses (B) in fan
case. Assure short locking rib (C) faces downward. Slide
elbow pipe into fan case until a clicking sound is heard.
3. Place debris bag opening over flared end of elbow (D), and
cinch bag securely with Velcro strap (E).
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Blower housing may contain shredder blades and other sharp edges that can cause serious injuries
if touched, even if engine is off and blades are not moving. Wear gloves to protect hands from sharp
edges and hot surfaces.
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or
regulations regarding fire prevention requirements.
16
ES-250
B
A
C
D
E
X7501182904
© 05/2015 ECHO Inc.