iSM1050-ENG-SPA v2_Layout 1 7/1/13 10:51 AM Page 4
Installation
4. Insert the Base into the Pedestal
u
v
5. Insert and tighten the self-tapping
6. Insert the speaker body into the
4
u and then gently rotate
clockwise v until the screw hole
in the Base aligns with the screw
hole in the Pedestal.
screw (silver) into the top of the
Pedestal.
Speaker Stand making sure to
align the screw holes, then insert
two screws (black) through the
bottom of the base into the
bottom of the speaker body to
secure. Repeat for other speaker.