How To Vacuum Package Using Foodsaver; Canisters And Bottle Stoppers - Sunbeam VS8000 User Manual

How to Vacuum Package using
FoodSaver
1. Place the appliance on a flat, dry surface
and plug the power cord into a standard
electrical outlet.
2. Canisters: place the items to be vacuum
packaged inside the canister. Place the
lid on top of the canister*. See figure 7.
Figure 7
Bottle Stoppers: insert the Bottle Stopper
into the neck of the bottle.
Leave at least 2.5cm between the
contents and the rim. See figure 8.
Figure 8
14

Canisters and Bottle Stoppers

®
3. Pull out the Retractable Accessory Hose
and insert the end into the lid of a
F
canister or bottle stopper.
4. Press 'Accessory' button
vacuum process for either canisters or
bottles, motor will run until vacuum
process is complete.
5. When light indicator turns off, gently
twist and remove Accessory Hose from
appliance and canister or bottle stopper.
How to Open the FoodSaver
To open, press and hold down the grey
rubber button in the center of the lid. This
will release the vacuum – a hissing sound
can be heard as the air rushes in.
* FoodSaver ® Canisters sold separately.
How to Remove the FoodSaver
To remove, simply twist and pull up on the
Bottle Stopper to release the vacuum.
DO NOT STORE CANISTER IN THE FREEZER.
to begin
4
® Canister
® Bottle Stopper