Installation Of Child Restraint With Top Strap - Suzuki SX4 Owner's Manual

BEFORE DRIVING
EXAMPLE
54G185
6) Grasp the front of the child restraint and
push the child restraint forcefully to
latch the connecting bars. Make sure
they are securely latched by trying to
move the child restraint system in all
directions, especially forward.
7) Return the seatback if folded.
8) Attach the top strap referring to "Instal-
lation of Child Restraint with Top Strap"
section below (if equipped).
1-35
Installation of Child Restraint with
Top Strap
EXAMPLE
-,J.c=::!-Front~~~
~
80JS072
Some child restraint systems require the
use of a top strap. Top strap anchor brack-
ets are located on the back of the rear
seatbacks. The number of the anchor
bracket provided in your vehicle depends
on the vehicle specification. Install the
child restraint system as follows:
1) Remove the luggage compartment
cover.
2) Secure the child restraint on rear seat
using the procedure described above
for securing a restraint system that
does not require a top strap.
3) Hook the top strap to the anchor
bracket and tighten the top strap
according to the instructions provided
by the child restraint system manufac-
turer. Be sure to attach the top strap to
the corresponding anchor located
directly behind the child restraint. Do
not attach the top strap to the luggage
restraint loops (if equipped).
A.
WARNING
Do not attach the child restraint top
strap to the luggage restraint loops
(if equipped). Incorrectly attached top
strap will reduce the intended effec-
tiveness of the child restraint system.
Type 1
Type 2
86G032