CHAPTER 3 MECHANICAL SYSTEMS
5.8 Removing the Press Motor (M105)
1) As shown in 5.3, remove the lower
press assembly.
2) Shift the roller [1] as shown in the fig-
ure; then, remove the 4 screws [2], and
detach the plate [3].
3) Remove the 2 screws [1], and discon-
nect the connector [2]; then, detach the
press motor [3].
3-32
COPYRIGHT© 2002 CANON INC.
F03-508-01
F03-508-02
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002