GMC 2011 Terrain Owner's Manual page 58

3-4 Seats and Restraints
To adjust the seatback, see
Reclining Seatbacks on page 3 6.
To adjust the lumbar support, see
Lumbar Adjustment on page 3 6.
Eight Way Power Seats
To adjust a power seat, if equipped:
Move the seat forward or
rearward by sliding the control
forward or rearward.
Raise or lower the front or rear
part of the seat cushion by
moving the front or rear of the
control up or down.
Raise or lower the entire seat
by moving the entire control up
or down.
To adjust the seatback, see
Reclining Seatbacks on page 3 6.
To adjust the lumbar support, see
Lumbar Adjustment on page 3 6.
Memory Seat and Mirrors
On vehicles with the memory
feature, the 1 and 2 buttons on
the outboard side of the driver seat
are used to manually save and
recall the driver seat and outside
mirror positions. These manually
stored positions are referred to as
Button Memory positions.
The vehicle will also automatically
save driver seat and outside mirror
positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
turned off. These automatically
stored positions are referred to
as RKE Memory positions. See
Remote Keyless Entry (RKE)
System Operation on page 2 3 for
more information.
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, and both outside mirrors
to the desired driving positions.
2. Press and release the
MEM (Memory) button.
3. Press 1 until a beep sounds.
4. Repeat Steps 1 through 3 for a
second driver using 2.