Wall Mounting - Bush 40/233F User Manual

Wall Mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electric wires, water or
gas pipes.
1) Remove the four screws located at the back of the TV set.
2) The wall mount can now be easily attached to the mounting holes, located on the back of the TV, using the same
four screws removed.
IMPORTANT – If wall mounting this TV, only use the
screws already provided in the wall mounting holes.
Using other screws which are longer could cause
irreparable damage to internal parts.
For optimum viewing, if wall mounting the TV higher
than eye level, the TV should be tilted downwards so
that the TV's screen is 'face on'.
See fi g 1 and 2 below.
fi g 1
INCORRECT
Viewing angle
CORRECT
fi g 2
Viewing angle
For VESA wall mounting information please refer to
the Technical Specifi cation page.
For any help concerning set up and use of your TV please call the Customer Helpline on page 3
TV
TV
11