Honeywell LYNX Touch 5100 Programming Manual page 10

Screen Display
Communicator Type
None
Phone Number
Communicator Type
None
Phone Number
Account Number
FFFF
Dynamic Priority
None
Dynamic Delay
None
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Disabled
Report Open/Close
Disabled
Report Tests
Enabled
Follow Me Phone 1
Phone Type
None
Phone Type
None
Report All
Press to Report All
Function & Programming Options
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Enter the Secondary Central Station Phone Number (Up to 20 digits)
Communicator Type
None
GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Enter the Secondary Central Station Phone Number
Account Number
Enter the Secondary Central Station Account Number
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note: If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
None
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Disabled
Enabled
Follow Me Phone 1
Choose from the following options:
Phone Type
Report All
Report Troubles
Report Tests
Phone Type
None
Follow me
Phone Number
Enter the Follow Me Phone Number
Report All
Press to Report All
Report All Set
Phone Number
Report Alarms
Report Open/Close
- 10 -