Recognition) - Cadillac 2014 ATS Owner's Manual

7-26 Infotainment System
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Accepting a Call Waiting Call
To accept a call waiting call, do one
of the following:
Press the area just above the
chrome bar and below the
SWITCH screen button.
Press on the steering wheel
controls.
Declining a Call Waiting Call
To decline a call waiting call, do one
of the following:
Press the area just above the
chrome bar and below the
IGNORE screen button.
Press on the steering wheel
controls or do nothing
Ending a Call
To end a call, do one of the
following:
Press the area just above the
chrome bar and below the
END screen button.
Press on the steering wheel
controls.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Press the area just above the
chrome bar and below the
KEYPAD screen button.
2. Turn the MENU knob to highlight
the first digit and press to select.
If not initially in the phone
application, from the Home Page,
turn the MENU knob, then press to
select the PHONE screen button.
From the PHONE main menu, turn
the MENU knob to highlight Active
Call and press to select.
Bluetooth (Voice

Recognition)

Using Voice Recognition
To use voice recognition, press
on the steering wheel. Use the
commands below for the various
voice features. For additional
information, say Help while you
are in a voice recognition menu.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls can
be made using OnStar Hands-Free
Calling, if available. See OnStar
Overview on page 14-1.