Usb Configuration; Onboard Devices Configuration - Asus B150 PRO GAMING User Manual

SMART Self Test [On]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1~6(Gray) [Enabled]
Allow you to enable/disable the SATA6G_1~6 port. Configuration options: [Disabled]
[Enabled]
Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
2.6.6

USB Configuration

The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
XHCI Hand-off [Disabled]
[Enabled]
[Disabled]
USB Single Port Control
The subitems in this menu allow you to set the USB Port Disable Override features.
USB3_1~6, USB7~12 [Enabled]
Allows you to enable or disable the USB ports individually. Configuration options:
[Disabled] [Enabled]
Refer to section 1.2.3 Motherboard layout for the location of the USB ports.
2.6.7

Onboard Devices Configuration

HD Audio Controller [Enabled]
[Enabled]
[Disabled]
2-28
Your system supports the USB devices in legacy operating systems.
Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
Enables the support for operating systems without an XHCI hand-off
feature.
Disables the XHCI Hand-off support.
Enables the HD Audio Device.
Disables the HD Audio Device.
Chapter 2: Getting started