Toyota highlander 2015 Instruction Manual page 607

4
Lay the tire on the ground with
the outer surface (valve stem)
facing up.
5
Before raising the tire, make
sure that the hoist assembly is
perpendicular to the wheel
opening. (Try to place the tire
directly beneath the vehicle,
near where the wire cable is
hanging from.)
6
Using the jack handle and adapter socket, tighten the tire clamp
bolt by turning it clockwise until the tire is in the correct position and
two clicks are heard as the jack handle skips.
7
Stow the jack and all tools.
HIGHLANDER_U (OM48E98U)
8-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
607
Valve stem
8