Remote Amperage/Voltage Control - Miller Electric Legend 301 G Owner's Manual

6-4. Remote Amperage/Voltage Control

Example: Combination Remote Amperage Control (Stick)
Set V/A Adjust
Switch
1
Set Process
3
2
Max (180 A DC)
Min (40 A DC)
Adjust Remote Control
(Stick Welding Only)
.
This unit does not have remote con-
tactor control. Output is always on.
1 Remote Receptacle RC4
Connect optional remote control to
RC4 (see Section 5-8).
2 Remote Hand Control (Optional)
3 Remote Foot Control (Optional)
.
Engine runs at weld speed when
a device connected to the remote
receptacle makes closure be-
tween pins A and B (example:
trigger pull on MIG gun).
In Example:
Process = Stick (Using Remote On/Off)
Min = 40 A CC/DC
Max = 180 A CC/DC
Set
V/A Control
803 128 / 211 909 / S-0769 / S-0774
OM-4411 Page 25