Zte Blade S6 Quick Start Manual

LEGAL INFORMATION
Copyright © 2015 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by
any means, electronic or mechanical, including
photocopying and microfilm, without the prior
written permission of ZTE Corporation.
Notice
ZTE Blade S6
ZTE Corporation reserves the right to make
modifications on print errors or update
Quick Start Guide
specifications in this guide without prior notice.
We offer self-service for our smart terminal device
users. Please visit the ZTE official website (at www.
ztedevice.com) for more information on self-service
and supported product models. Information on the
website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability
for faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may
differ from the actual product. Content in this guide
may differ from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
1
Charging the Battery
NOTE:
If the battery is extremely low, you may be unable
Your phone's battery should have enough power
to power on the phone even when it is being
for the phone to turn on, find a signal, and make
charged. In this case, try again after charging
a few calls. You should fully charge the battery as
the phone for at least 20 minutes. Contact the
soon as possible.
customer service if you still cannot power on the
WARNING!
phone after prolonged charging.
Use only ZTE-approved chargers and cables. The
Powering On/Off Your Phone
use of unapproved accessories could damage your
phone or cause the battery to explode.
Ensure that the battery is charged.
CAUTION:
• Press and hold the Power Key to turn on your
Do not remove or change the built-in rechargeable phone.
battery in your phone by yourself. The battery can • To turn it off, press and hold the Power Key to
only be changed by ZTE or ZTE authorised service open the options menu. Touch Power off and
provider. then touch OK.
1. Connect the adapter to the charging jack. You can also press and hold the Power Key for
Ensure that the adapter is inserted in the about 10 seconds to turn off your phone.
correct direction.
Waking Up Your Phone
Your phone automatically goes into sleep mode
when it is not in use for some time. The display is
turned off to save power and the keys are locked to
prevent accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
2. Connect the charger to a standard AC power
1. Press the Power Key to turn the screen on.
outlet.
2. Swipe up to unlock.
3. Disconnect the charger when the battery is fully
NOTE:
charged.
If you have set an unlock pattern, a PIN or a
password for your phone, you'll need to draw the
pattern, or enter the PIN/password to unlock your
phone.
8
Google and Android are trademarks of Google, Inc.
®
The Bluetooth trademark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
trademarks by ZTE Corporation is under license.
microSDHC Logo is a trademark of SD-3C,
LLC.
Qualcomm ® Snapdragon™ processors are
products of Qualcomm Technologies, Inc.
Qualcomm and Snapdragon are trademarks of
Qualcomm Incorporated, registered in the United
States and other countries. Used with permission.
License Notice and Trademark Acknowledgment
Required for Licensed Products.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby Laboratories.
Other trademarks and trade names are the
property of their respective owners.
Version No.: R1.0
Edition Time : February 10, 2015
Manual No. : 079584507167
2 3
Using the Touch Screen
Your phone's touch screen enables you to control
actions through a variety of touch gestures.
• Touch
When you want to type using the onscreen
keyboard, select items on the screen such as
the application and settings icons, or press the
onscreen buttons, simply touch them with your
finger.
• Touch and Hold
To open the available options for an item (for
example, a message or link in a web page),
touch and hold the item.
• Swipe or Slide
To swipe or slide means to quickly drag your
finger vertically or horizontally across the
screen.
9 10
Getting to Know Your Phone
Key
• Press and hold to turn on or
Proximity & off airplane mode, enable no
Front Camera
Light Sensor
interruptions mode, priority
Earpiece
interruptions only mode, silent
Volume Key
Power Key mode with vibration, disable
silent mode, power off or reboot
nano-SIM Power Key
the phone.
Card Tray
• Press to turn off or on the
Touch Screen
microSDHC
screen display.
Card Tray
• Touch to return to the home
screen.
Home Key
• Touch and hold to open Google
Back Key
Menu Key
Search.
Home Key
Back Key Touch to go to the previous screen.
Headset Jack
• Touch to view the options for
Flash
Auxiliary
the current screen.
Microphone
Back Camera Menu Key
• Touch and hold to see recently
used applications.
Press or hold either end of the key
Volume Key
to turn the volume up or down.
NOTE:
You can exchange the positions of the Back Key
and the Menu Key. Touch Settings > Custom
bottom key from the home screen and select one
Speaker
case.
Charging/
Main
micro-USB
Microphone
Jack
4
Product Safety Information
Don't make or receive phone calls
while driving. Never text while driving.
For body-worn operations, maintain a
separation of 15 mm.
• Drag
Small parts may cause choking.
To drag, press and hold your finger with some
pressure before you start to move your finger.
Your phone can produce a loud sound.
While dragging, do not release your finger until
you have reached the target position.
To prevent possible hearing damage,
do not listen at high volume levels for
long periods.
Avoid contact with anything magnetic.
Keep away from pacemakers and
• Pinch
other electronic medical devices.
In some apps (such as Maps, Browser, and
Turn off when asked to in hospitals
Gallery), you can zoom in and out by placing
and medical facilities.
two fingers on the screen at once and pinching
them together (to zoom out) or spreading them
Turn off when told to on aircraft and at
apart (to zoom in).
airport.
Turn off when near explosive materials
or liquids.
Don't use at gas stations.
Your phone may produce a bright or
• Rotate the screen
flashing light.
For most screens, you can automatically
change the screen orientation from portrait to
Don't dispose of your phone in fire.
landscape by turning the phone sideways.
11
Installing the nano-SIM Card
Function
Power off your phone before installing or removing
the micro-SIM card.
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You can get a
standard nano-SIM card from your service provider.
1. Insert the tip of the tray eject tool into the hole
on the nano-SIM card tray.
2. Pull out the nano-SIM card tray and place the
nano-SIM cards on the tray, as shown. Then
carefully install the tray back.
Card Slot 2
Card Slot 1
NOTES:
• Place your LTE, WCDMA or GSM nano-SIM
card on the Card Slot 1.
• Place your GSM nano-SIM card on the Card
Slot 2.
5 6
Avoid extreme temperatures.
Avoid contact with liquids. Keep your
phone dry.
Do not attempt to disassemble your
phone.
Only use approved accessories.
Don't rely on your phone as a primary
device for emergency communications.
Radio Frequency (RF) Exposure
General Statement on RF Energy
Your phone contains a transmitter and a receiver.
When it is ON, it receives and transmits RF energy.
When you communicate with your phone, the
system handling your call controls the power level
at which your phone transmits.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
12 13
Installing the microSDHC™ Card
(Not Included)
A microSDHC card can be installed or removed
while the phone is turned on. You need to unmount
the microSDHC card before removing it.
1. Insert the tip of the tray eject tool into the hole
on the microSDHC card tray.
2. Pull out the tray and place the card on the tray,
as shown. Then carefully install the tray back.
NOTE:
Some applications may require a microSDHC
card to work normally or may store certain data
on it. Therefore, it is recommended that you keep
a microSDHC card installed and not remove or
replace it randomly.
7
The guidelines use a unit of measurement known
as Specific Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and the highest
SAR value for this device when tested at the head
was 1.29 W/kg*, and when tested at the body was
1.34 W/kg*. As mobile devices offer a range of
functions, they can be used in other positions, such
as on the body as described in this user guide**.
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses the
minimum power required to communicate with the
network.
* The tests are carried out in accordance with
EN 50360, EN 50366, EN62479, EN 62311, EN
62209-1, EN 62209-2.
** Please see body worn operation.
Body Worn Operation
Important safety information regarding radio
frequency radiation (RF) exposure:
To ensure compliance with RF exposure guidelines
the phone must be used with a minimum of 15 mm
separation from the body.
Failure to observe these instructions could result in
your RF exposure exceeding the relevant guideline
limits.
14