Table of Contents
Advertisement
When trying to display an image, " ×" appears
instead of it.
Or "×" appears for the demo play or the preview
function.
･ " ×" may appear instead of destroyed
image data.
■
Bluetooth function
The terminal cannot be connected to a Bluetooth
communication device/A Bluetooth
communication device cannot be found from the
terminal.
･ Make Bluetooth communication device
(commercial item) registering stand-by
state and then register the device on
the terminal. If you delete already
registered device and register the
device again as a new device, delete
the registrations on both Bluetooth
communication device (commercial
item) and the terminal and then
perform registration of the devices.
Calls cannot be made from the terminal
connecting to external device such as car
navigation or handsfree devices.
･ If calls are made several times when
the other party does not answer or is
out of service, the call to this number
may be disabled. In this case, turn
terminal off and on.
Error messages
No service
･ The terminal is out of service area, or the
-
received signal is too weak. Move to a
location where radio signal can be reached.
･ The UIM is not working properly.
Insert the UIM in another terminal. If this
works, it is probably the terminal that is
causing the problem. In this case, contact
"Repairs" on the last page of this manual (in
P.144
Japanese only).
Removing and inserting UIM may improve
the problem.
SIM card is locked
Enter your PIN code (P.108) correctly.
SIM card is PUK-locked
Enter your PUK (Personal Unblocking Key)
(P.108) correctly.
The phone storage is full
-
There is no memory space. Delete
unnecessary applications (P.113) to obtain
memory space.
Appendix/Index
197
Advertisement
Table of Contents
