Sony SLV-788HF Operating Instructions Manual page 55

Tips
• To select a channel, you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
• You can select a video source from the LINE-1 IN or LINE-2 IN jacks using INPUT
SELECT.
• The display appears on the TV screen indicating information about the tape, but the
information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When
using a cable box, make sure to leave it on.
Notes
• The remaining time may not be indicated accurately for:
– short tapes less than T-20
– T-130
– T-210
– tapes recorded in the LP mode.
• The display doesn't appear during still (pause) mode, search mode, or slow-motion
playback.
• It may take up to one minute for the VCR to calculate and display the remaining
time after you press DISPLAY.
55
Basic Operations