About Hdd And Ssd; About M.2 Ssd Slot - MSI Gaming G Series User Manual

▶ Point and Click
When you have moved and placed the cursor over an icon, a menu item or
a command that you want to execute, simply tap slightly on the touchpad or
press the left button to select. This procedure, called as point and click is the
basics of operating your notebook. Unlike the traditional pointing device such
as the mouse, the whole touchpad can act as a left button, so that your each
tap on the touchpad is equivalent to pressing the left button. Tapping twice
more rapidly on the touchpad is to execute a double-click.
▶ Drag and Drop
You can move files or objects in your notebook by using drag-and-drop. To do
so, place the cursor on the desired item and slightly tap twice on the touchpad,
and then keep your fingertip in contact with the touchpad on the second tap.
Now, you can drag the selected item to the desired location by moving your
finger on the touchpad, and then lift your finger from the touchpad to drop
the item into place. Alternately, you can press and hold the left button when
you select an item, and then move your finger to the desired location; finally,
release the left button to finish the drag-and-drop operation.

About HDD and SSD

This notebook may be equipped with hard disk drive (HDD) or solid state drive
(SSD) depending on the models users purchased.
The hard disk drive and solid state drive are the data storage devices used for
storing and retrieving digital information. Most SSDs use NAND-based flash
memory, and have higher data transfer rates, lower power consumption, and faster
read/write speed than HDDs.
Do not attempt to remove or install the HDD and SSD when the notebook is
powered on. Please consult an authorized retailer or service center for the
replacement of the HDDs and SSDs.

About M.2 SSD Slot

The notebook may be equipped with M.2 SSD slots for M.2 SSD cards, which are
compatible with SATA or PCIe interfaces, providing diverse features and usages to
users. Consult an authorized retailer or service center for correct specifications and
installations.
3-11