Lcd Display & Keyboard; Initial Settings; Specifications; Contrast - Brother P-Touch PT-D210 User Manual

LCD Display & Keyboard
1 1
2
3
8
9
10
11
12
13
14
15
16
17
18
1. Size 15. Font key
2. Cursor 16. Character key
3. Underline/Frame 17. Caps key
4. Width 18. Shift key
5. Style 19. Tape cutter lever
6. Caps 20. Print key
7. Label Length 21. Preview key
If a specific label length 22. Frame key
has been selected, 23. Symbol key
also appears. 24. Template Library key
8. OK key 25. Backspace key
9. Cursor key : Right (Use 26. Enter key
with Shift key to go to 27. Accent key
end of the text.) 28. Space key
10. Cursor key : Left (Use
with Shift key to go to
top of the text.)
11. Escape key
12. Power key
13. Menu key
14. Label key
4
5
6
7
19
20
21
22
23
24
25
26
27
18
28
NOTE
• The LCD shows one row of 15 characters;
however, the text that you enter can be up to 80
characters in length.
• While selecting the settings, press Space key to go
back to the default item.
• Pressing the Preview key displays a generated
image of the label, and may differ from the actual
label when printed.
• Label length shown on LCD may differ slightly
from the actual label length when printed.

Specifications

Dimensions: Approx. 157(W) x 150(D) x 68(H) mm
(W x D x H)
Weight: Approx. 490 g
(without batteries and tape cassette)
Power supply: Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*
Optional AC adapter (AD-24ES)
Tape cassette: Brother TZe tape (width)
3.5 mm, 6 mm, 9 mm, 12 mm
1
* Visit us at http://support.brother.com/ for the latest
information about the recommended batteries.

Initial Settings

1
Turn on your machine.
Supply power by using six AAA batteries or the
optional AC adapter (AD-24ES), and then
press .
2
Set the language.
The default setting is [English].
/ [Language]
/ [English/Español/Français/
Hrvatski/Italiano/Magyar/Nederlands/
Norsk/Polski/Português/Portug. (BR)/
Românã/Slovenski/Slovenský/Suomi/
Svenska/Türkçe/Čeština/Dansk/Deutsch]
.
3
Set the unit of measurement.
The default setting is [inch].
/ [Unit]
/ [inch/mm]
NOTE
• The machine automatically turns off if no keys are
pressed within five minutes.
• To cancel any operation, press
• After pressing , "Accepted" will be displayed
for approximately 1 second.

Contrast

This function allows you to set the brightness of the
LCD display. You can select from five levels of
brightness.
The default setting is [0].
/ [LCD Contrast]
/ [-2/-1/0/+1/+2]
• To change back to default setting, press Space
key.
• After pressing , "Accepted" will be
displayed for approximately 1 second.
1
Accessories
Tape See the included "Supplies and
Cassettes: Accessories Guide".
AC Adapter: AD-24ES
Cutter Unit: TC-4 (replacement)
If the cutter blade becomes blunt after repetitive use
and the tape cannot be cut cleanly, replace with new
cutter unit (stock no. TC-4) by obtaining from an
authorized Brother reseller.
 Replacing the Cutter Unit
Pull out the two sections of the cutter unit
1.
(green) in the direction of the arrows shown in
the illustration.
.
Install a new cutter unit. Push it in until it snaps
2.
into place.
.
WARNING
Do not touch the cutter blade directly with your
fingers.