Watching TV
Cable / Satellite / Fiber Optic box
Initial setting
1. Connecting
Select the wiring method connecting your box to the TV, AV IN or
Antenna/Cable in.
Note:
HDMI will provide the best HD picture
●
2. Change INPUT
INPUT
Press the
INPUT
seconds.
The menu choices vary depending on which input is selected.
●
3. Power on your Cable, Satellite or Fiber Optic box
Use the box's remote control to change channels.
If the box is connected to the TV using a COAX cable (Antenna/Cable
●
in), then set the TV channel to CH3 or CH4. Note that the picture will
not be in HD.
CC/SAP is not available when watching TV with a Cable or Satellite
●
box connected via HDMI.
If you have a High Definition box, ensure that it is outputting 720p or
●
1080i signal.
Tip: press the TV's
Check your box's "aspect" or "format" settings. It should be set to 16:9,
●
Widescreen or Full.
If the audio volume is too low, check the box's audio settings.
●
Contact your Cable or Satellite provider for instructions of any box
●
settings.
button to select the proper connection. Wait for 2
INFO
button to verify.
- 29 -