Slot And Input/Output Terminal Numbering - Panasonic ET-MWP100G Operating Instructions Manual

Hide thumbs Also See for ET-MWP100G:
Table of Contents

Advertisement

r POWER SUPPLY section
1
<POWER> switch
Turns the power on/off.
2
<AC IN> terminal
Connects the supplied power cord.

Slot and input/output terminal numbering

r Slots
This device has 16 slots for installing optional interface boards for signal input and output. From the top left, the slots are numbered Slot1,
Slot2, up to Slot16.
Note
f Slot1 and Slot2 are exclusively used by input interface boards while Slot15 and Slot16 are exclusively used by output interface boards.
The 12 slots from Slot3 to Slot14 can be used by either input or output interface boards. For details on possible installation locations, refer
to "Installing optional accessories" (x page 71).
r Input/output terminals
The input terminals are numbered in1, in2, and so on in order from the left. Similarly, the output terminals are numbered out1, out2, and so
on.
(Example 1: In the case of Interface Board for HD/SD-SDI 4input)
(Example 2: In the case of Interface Board for Digital Link 2output)
Note
f The Control Software for Multi Window Processor shows individual input and output terminals ([Input Fixed Name]/[Output Fixed Name]) by
combining the slot number ([Slot Index]) and input/output terminal number ([Input Index]/[Output Index]).
Example 1: The [Input Fixed Name] of [in1] on the left end of the input board installed in Slot1 is [Slot1.In1].
Example 2: The [Output Fixed Name] of [out1] on the left end of the output board installed in Slot15 is [Slot15.Out1].
18 - ENGLISH
Chapter 1 Preparation — About your device
1
POWER
OFF ON
AC IN~
2
Slot1
Slot2
Slot5
Slot6
Slot9
Slot10
Slot13
Slot14
1
2
3
ST
HD-SDI INPUT
in1
in2
DIGITAL
LINK
out1
100-240Vac
50-60Hz
+12V
3 4
3
Power input indicator
Displays the power input status.
Turns on at all times while the device is on and turns off when
the power is switched off.
4
Power output indicator
Displays the power output status.
Turns on when DC voltage is output.
Slot3
Slot4
Slot7
Slot8
Slot11
Slot12
Slot15
Slot16
4
HD-SDI INPUT
in3
in4
DIGITAL
LINK
out2

Advertisement

Table of Contents
loading

Table of Contents