NS-20ED310NA15 20" 720p 60Hz LED DVD Combo TV
AV (composite video) (good)
Notes
On your TV
AV video
Audio cable
cable
connectors
connector
AV video
jack
audio jacks
1 Make sure that your TV's power adapter is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the VIDEO / Y jack and L and R AUDIO jacks on the side of your TV and to the
AV OUT jacks on the DVD or Blu-ray player.
Important
3 Plug your TV's power adapter into a power outlet, then turn on your TV and the DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
or
to select Component/AV, then press OK.
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO / Y jack.
DVD or Blu-ray
player
Analog
AV cable
• The VIDEO / Y, P
, and P
B
device) share the L and R AUDIO jacks with the VIDEO / Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
www.insigniaproducts.com
video jacks (used to connect a component
R
Side of TV
21