Table of Contents
Advertisement
9. IPMI connector (4-pin IPMI)
The Intelligent Platform Management Interface (IPMI) connector is for
the ASMC card. Connect the 4-pin ASMC interface cable to this
connector.
PR-DLS533
PR-DLS533 IPMI Connector
10. Wake-On-LAN Connector (3-pin WOL_CON)
This connector supports a LAN card with a Wake-On-LAN output. The
connector powers up the system when a wakeup packet or signal is
received through the LAN card.
PR-DLS533
PR-DLS533 Wake-On-LAN Connector
ASUS AP2400R-E1 2U barebone server
IPMI
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
WOL_CON
Ground
PME
+5 Volt Standby
4-13
Advertisement
Table of Contents
