Brother P-touch 1800 User Manual page 13

INSTANT-LETTERING TAPE (RUB-ON TRANSFERS)
Instant-lettering tape is used to transfer your text onto paper. After printing the text onto
instant-lettering tape and cutting off the label, position the label with its non-printed side
facing up on a sheet of paper. By simply rubbing the instant lettering tape's non-printed
side with the enclosed stick, you can transfer the text directly onto the paper.
Hold the tape very firmly and do not move it while rubbing the tape.
IRON-ON TRANSFER TAPE
Iron-on transfer tape is used to transfer your text onto garments using an iron.
1
Insert an iron-on transfer tape cassette, press
down on the tape cutter lever to cut off the label.
2
Iron the garment to flatten it before transferring the text.
3
Place the label on the garment at the location where you wish the text to be trans-
ferred.
4
Set the iron to cotton (150 to 180˚C), then press down on the label with the iron for
about 15 seconds.
5
Allow the iron-on transfer to cool (for about 60 seconds), then carefully remove the
backing tape.
Mirror
to print the text, then push
Print
9