When To Change The Thread Catcher Pads; Replacing The Thread Catchers - Miele S 500 - S 548 Operating Instructions Manual

Maintenance and care
When to change the thread
catcher pads
Check the thread catchers on the suc-
tion inlet of the floor brush and the up-
holstery nozzle from time to time. Re-
place them if the pile is worn.

Replacing the thread catchers

^ Use a screwdriver or similar object to
remove them from the slots.
^ Insert the new thread catchers.
Servicing the floor roller
a Use a coin to release the roller pin
(bayonet connection), and pull out the
pin.
b Take out the roller.
Remove all threads and hair etc, then
reassemble the parts in the correct or-
der.
Spare parts are available from your
Miele dealer or from the Miele Parts De-
partment.
37