Electrical connection - Country
variants
Please refer to your electrical
distributor.
Single phase AC 230 V - country
variant
This device is intended for connection
to a power supply system where the
maximum value of external phase
neutral loop impedance Z
0.35 Ohms at the point of distributor
supply connection is not exceeded.
If in doubt, please ask your electrical
distributor for actual Z
user has to ensure that this device is
connected only to a power supply
system which fulfils the requirement
above.
Wiring diagram – country variant
of
max
value. The
max
Electrical connection
Three phase 3 N AC 230 V
Wiring diagram – country variant
81