Basic Features
Satellite System
Satellite System
is available when
channel scan is run normally.
•
Satellite
Selection: You can choose the satellites for this TV.
•
LNB Power (Off
/ On): Enables or disables the power supply for the LNB.
LNB
Settings: Configures the outdoor equipment.
•
–
Satellite: Selects the satellite for receiving digital broadcasts.
–
Transponder: Selects a transponder from the list or adds a new transponder.
–
DiSEqC
Mode: Selects DiSEqC mode for the selected LNB.
–
Lower LNB
Oscillators: Sets the LNB oscillators to a lower frequency.
–
Upper LNB
Oscillators: Sets the LNB oscillators to a higher frequency.
–
Tone 22 kHz (Off
/
should be Auto.
–
Signal
Quality: Display the current status of broadcasting signal.
•
Positioner
Settings: Configures the antenna positioner.
Positioner (On
/ Off): Enables or disables the positioned control.
Positioner Type (USALS
Automatic Location System).
–
My
Longitude: Sets the longitude for my location.
–
My
Latitude: Sets the latitude for my location.
–
Satellite Longitude
User
Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of
satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can
be moved to pre-populated position.
–
Satellite: Selects the satellite to set the position for.
–
Transponder: Selects a transponder from the list for signal reception.
–
Moving
Mode: Selects the movement mode between discrete and continuous movement.
–
Step
Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is
set to Step.
–
Go To Stored
Position: Rotates the antenna to the stored satellite position.
–
Aerial
Position: Rotate the aerial and store position for this satellite.
–
Store Current
Position: Stores current position as the selected positioner limit.
–
Signal
Quality: Display the current status of broadcasting signal.
(for TD310ES model)
Antenna
is set to Satellite. Before running
On
/ Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it
/
DiSEqC
1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite
Settings: Sets the longitude of user defined satellites.
English - 48
Auto
Tuning, set
Satellite
System. Then