Integrated Installations Models 4700 Fb And 4800 Fb - Miele ESW 4700 Operating And Installation Instructions

Installation
Integrated installations
Models 4700 FB and 4800 FB
Custom made front panels can be
installed with models 4700 FB and
4800 FB.
Panel dimensions
4700 FB
3
Width 27 / " (695 mm)
8
Height 11" (279 mm)
4800 FB
13
Width 29 / " (757mm)
16
Height 11" (279 mm)
The custom panel must be atleast
(10 mm) thick and made of heat resist-
ant material140 °F (60 °C).
32
a Install a handle to the custom front
panel using counter sunk screws.
b Remove the drawer from the casing.
See "Removing the drawer".
The panel attached to the warming
drawer front can be used as the drilling
template for the custom panel.
3
/ "
8
c Loosen the two screws on the inner
side of the drawer and remove the
panel from the appliance front.
d Place the panel on a firm surface
with the adhesive tape facing up.
Peel the backing from the adhesive
tape.
e Position the custom panel over the
removed panel using the tape to hold
it in place.