Advertisement
ENGLISH
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
the iron must be used and rested on a
Ÿ
stable surface
when placing the iron on its stand,
Ÿ
ensure that the surface on which the
stand is placed is stable
the iron is not to be used if it has been
Ÿ
dropped, if there are visible signs of
damage or if it is leaking
The iron must not be left unattended
Ÿ
while it is connected to the supply mains
the plug must be removed from the
Ÿ
socket-outlet before the water reservoir is
filled with water
the filling aperture must not be opened
Ÿ
during use. instructions for the safe
refilling of the water reservoir shall be
given
Mains Plug Replacement
If a new mains plug needs to be fitted:
Ÿ Safely dispose of the old plug
Ÿ Connect the brown lead to the live
terminal of the new plug
Ÿ Connect the blue lead to the neutral
terminal
Ÿ If the product is class I (earthed),connect
the green/yellow lead to the earth terminal
Warning! If your product is class II double
insulated(only 2 wires in the cord set),no
connection is to be made to the earth terminal.
Follow the fitting instruction supplied with
4
good quality plugs.
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Features
Ÿ Temperature control dial for setting the
correct temperature for the fabric
Ÿ Non stick coated(F150)soleplate for safe
and smooth ironing
Ÿ Fine mist spray for sharper creases
Ÿ Indicator lamp shows power status
Ÿ Full length button grooves maker ironing
around buttons easier
Ÿ Swivel cord for durability and ease of use
How to use your Spray Iron
This iron is designed to iron clothing for
household use only.
Before the first use, check if the voltage rating
on the base plate corresponds to the mains
voltage in you home. Route the cord properly to
avoid tripping. Connect the plug to a standard
domestic outlet. Stand the iron on its heel. Turn
the temperature dial to the correct fabric setting.
The thermostat light will glow indicating the iron
is heating up. When the light goes out, the
required the temperature has been reached.
Always test the temperature by first ironing a
hem or similar area. Remember, an iron heats
up faster than is cools down. So start with cool
fabric and work up to hotter setting. If you turn a
setting down, allow the temperature to adjust
before continuing ironing.
Unplug the iron from the electricity supply
immediately after use. Unplug the iron by
gripping the plug and pulling it from the outlet.
Never yank on the cord.
Advertisement
