Toyota 2014 highlander Manual page 389

400
5-9. Bluetooth
Update contacts from phone
Operation methods differ between PBAP compatible and PBAP
incompatible but OPP compatible Bluetooth
If your cellular phone is neither PBAP nor OPP compatible, the con-
tacts cannot be transferred.
For PBAP Compatible Bluetooth
■
Select "Update Contacts from Phone".
1
Check that a confirmation screen is displayed when the opera-
2
tion is complete.
This operation may be unnecessary depending on the type of cellular
phone.
Depending on the type of cellular phone, OBEX authentication may be
required when transferring contact data. Enter "1234" into the
Bluetooth
If another Bluetooth
data, depending on the phone, the connected Bluetooth
need to be disconnected.
Depending on the type of Bluetooth
necessary to perform additional steps on the phone.
For PBAP Incompatible but OPP compatible Bluetooth
■
Phones
Select "Update Contacts from Phone".
1
Transfer the contact data to the system using a Bluetooth
2
phone.
This operation may be unnecessary depending on the type of cellular
phone.
Depending on the type of cellular phone, OBEX authentication may be
required when transferring contact data. Enter "1234" into the
Bluetooth
To cancel this function, select "Cancel".
Select "Done" when it appears on the screen.
3
Check that a confirmation screen is displayed when the opera-
4
tion is complete.
HIGHLANDER_U (OM48A12U)
®
phone
®
phone.
®
device is connected when transferring contact
®
phone.
®
phones.
®
Phones
®
®
phone being connected, it may be
device may
®
®