Setting The Position - Mercedes-Benz 2016 S-Class Operator's Manual

condition of charge of the high-voltage bat-
tery for the departure time set.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
( page 181).
Y
Head-up display submenu
Selecting other displays
Vehicle speed display
:
Vehicle speed and navigation instruction
;
display
Vehicle speed display and Traffic Sign Assist
=
Using the Display Content
choose from up to four display options depend-
ing on the vehicle's equipment. The selected
contents appear in the head-up display.
In Mercedes-AMG vehicles, you can also choose
between two AMG displays. If you select an
AMG display, the head-up display shows AMG-
specific contents.
Press the ò button on the steering wheel
X
to open the menu list.
Press : or 9 on the steering wheel to
X
select the Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
Display submenu.
Press a to confirm.
X
Press : or 9 to select
X
tent.
Press a to confirm.
X
A graphic selection list appears.
Press : or 9 to select the desired dis-
X
play.
Press the a button to confirm the selec-
X
tion.
function, you can
menu.
Head-up
Display Con‐
Menus and submenus
For further information about the traffic sign
displays, see Traffic Sign Assist (
Further information on navigation displays can
be found in the multimedia system; see the sep-
arate operating instructions.

Setting the position

You can adjust the position of the head-up dis-
play on the windshield. You can compensate for
height differences if the seat positions are
changed, for example.
Switch on the head-up display (
X
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
Display submenu.
Press a to confirm.
X
Press : or 9 to select the
X
function.
Press the a button to save the setting.
X
Press : or 9 to adjust the position to a
X
level from Level +5
Press the a or % button to save the
X
setting.
Using the Memory function, you can save and
call up the set position of the head-up display as
a single memory preset (
Setting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding ambient
light. You can also individually adjust the bright-
ness of the head-up display.
Switch on the head-up display (
X
Press ò on the steering wheel to open the
X
menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Display submenu.
Press a to confirm.
X
Press : or 9 to select the
X
function.
Press the a button to save the setting.
X
page 229).
Y
page 259).
Y
menu.
Head-up
Position
(up) to Level -5 (down).
page 126).
Y
page 259).
Y
menu.
Head-up
Brightness
Z
273