Frequently Asked Questions - Miele TOUCHTRONIC T 1312 Operating Instructions Manual

What if the dryer will not run?
Possible fault
The "Start/Stop T" button was not
pressed.
The circuit breaker tripped or the
dryer is unplugged.
The door is not closed.
How do I prevent static cling?
Add fabric softener to laundry when washing or select the "Less Dry" setting on
the dryer.
What if the drum light does not come on?
Possible fault
The bulb may be bad or burned
out.
What if the "Child Lock" indicator flashes after turning the dryer on and a
program cannot be started?
Possible fault
The child lock is activated.
What if the program stops, the "Anti-crease / End" indicator lights and the
buzzer sounds?
Possible fault
The drum is empty.
What if the "Filter/Vent" fault indicator is lit?
Possible fault
The lint filter is clogged.
The exhaust hose or the
connection is clogged with lint.
The air supply in the room is
insufficient.

Frequently asked questions

Fix
Make sure the dryer is on. Press the "Start/
Stop T" button to begin the drying program.
Make sure the dryer is plugged in or reset
the circuit breaker.
Close the door properly.
Fix
See "Changing the light bulb."
Fix
Deactivate the child lock. See "Child Lock."
Fix
Load laundry into the dryer. The dryer will not
operate when the drum is empty. Single
items should be dried with "Sturdy" or a
timed program and dry items in the "Fluff"
program.
Fix
Clean the lint filters. See "Dryer care".
Remove lint and check the exhaust system
for blockages.
Open a window or door to increase airflow.
17