Specifications - Hitachi C 7D Handling Instructions Manual

28. Place the wider portion of the saw base on that
part of the work piece which is solidly supported,
not on the section that will fall off when the cut
is made. As examples, Fig. 5 illustrates the right
way to cut off the end of board, and Fig. 6 the
wrong way. If the work piece is short or small,
clamp is down.
DON'T TRY TO HOLD SHORT PLACES BY HAND!

SPECIFICATIONS

POWER TOOL
Model
No-load speed
Capacity Cutting depth
Rechargeable battery
Light bulb
Weight
CHARGER
Model
Chargin voltage
Weight
4
Fig. 5
Fig. 6
90°
45°
29. Never attempt to saw with the circular saw held
upside down in a vise. This is extremely dangerous
and can lead to serious accidents. (Fig. 7)
30. When the brake becomes ineffective, replace the
carbon brushes with new ones.
C7D
2700/min.
60 mm
47 mm
Ni-Cd battery, 24V
24V, 5W
5.0 Kg
UC24YFB
24V
0.6 Kg
Fig. 7