Midland ProLine PL5161 Series User Manual
Midland ProLine PL5161 Series User Manual

Midland ProLine PL5161 Series User Manual

Proline series
Hide thumbs Also See for ProLine PL5161 Series:
Table of Contents

Advertisement

Quick Links

ProLine Series
Midland Radio Corporation
5900 Parretta Drive
North Kansas City, Missouri 64120
www.midlandradio.com
PL5161 / PL5164
Printed in Korea
P/N: 680-090-2032, Rev. B
P/N: 9300000099
User's Guide

Advertisement

Table of Contents
loading

Summary of Contents for Midland ProLine PL5161 Series

  • Page 1 ProLine Series Midland Radio Corporation 5900 Parretta Drive North Kansas City, Missouri 64120 www.midlandradio.com PL5161 / PL5164 Printed in Korea P/N: 680-090-2032, Rev. B P/N: 9300000099 User’s Guide...
  • Page 2: Table Of Contents

    Table of Contents FCC RF Exposure Compliance Requirements - for Occupational Use Only... 1 CAUTION VHF and UHF Radios (PL5161 / PL5164)... 1 CAUTION VHF Radio (PL5161)... 2 CAUTION UHF Radio (PL5164)... 2 About Midland... 3 About Your Midland Proline Radio... 4 Unpacking Information...
  • Page 3 Declaración de Garantía Midland Radio Corporation (Midland en adelante), garantiza que cada producto nuevo de radio fabricado o provisto por el mismo está libre de defectos en material y mano de obra bajo uso y servicio normal durante el intervalo de tiempo listado abajo, con la condición que el usuario haya cumplido con los requerimientos declarados en la presente.
  • Page 4 Midland Radio Corporation, excepto para la licencia libre de regalías no exclusiva normal para el uso que surge de la aplicación de la ley en la venta de un producto.
  • Page 5 Mantenimiento Su radio Midland ha sido diseñada para no requerir mantenimiento. Para mantener su radio en buenas condiciones de funcionamiento, siga estas instrucciones de limpieza: Limpie las superficies externas con un paño limpio • humedecido en una solución de detergente de vajilla suave diluido en agua.
  • Page 6: Fcc Rf Exposure Compliance Requirements For Occupational Use Only

    FCC RF Exposure Compliance Requirements for Occupational Use Only The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment. Midland subscribes to the same safety standard for the use of its products.
  • Page 7: Caution Vhf Radio (Pl5161)

    Accesorios Compatibles Receptor de cabeza de Ultra-lite con conector el • bloquer (ACC-616) Micrófono Parlante de Oído con conector el bloquer • (ACC-715) Micrófono Parlante del altavoz de la solapa con • conector el bloquer (ACC-714) Micrófono Parlante resistente con enchufe de auricular •...
  • Page 8 Midland Midland is the exclusive supplier of Midland brand communication ® products. Our product line ranges from FCC licensed two-way radios suitable for Business and Industry (B & I) markets such as farm, government, law enforcement, utility, etc., to consumer communications equipment for recreational and light-duty business markets.
  • Page 9: About Your Midland Proline Radio

    Please read this manual thoroughly before operating the radio. Application of some functions described in this manual are determined by the system you use. Your Midland Radio Dealer will program your radio for you to have the greatest number of functions possible relative to your needs.
  • Page 10: Unpacking Information

    Unpacking Information Carefully unpack the radio and its accessories. Use the item list below to identify the components included in the product packaging, to ensure that no items are discarded in the packing materials. Radio Body Antenna NiMH Battery Pack Speaker Microphone Jack Cover Belt Clip Screw Set...
  • Page 11: Radio Control Buttons / Operation Features

    Arbol de Menú de Opción del Sistema - Libre para Hablar (oprima MODE, a continuación oprima el botón ascendente o descendente para la opción) (oprima MODE, a continuación oprima el botón ascendente o descendente para el menú deseado) (oprima MODE, a continuación oprima el botón ascendente o descendente para la selección) (Oprima MODE para graduar la selección) Arbol de Menú...
  • Page 12 Radio Control Buttons..., continued H. Power / volume control (top panel of radio) - Powers radio on and adjusts radio volume. I. Scan button (front of radio) J. Up / Down select buttons (front of radio) K. Speaker (front of radio) L.
  • Page 13 Arbol de Menú de Opción del Sistema - Modo de Búsqueda de Prioridad (oprima MODE, a continuación oprima el botón ascendente o descendente para la opción) (oprima MODE, a continuación oprima el botón ascendente o descendente para el menú deseado) (oprima MODE, a continuación oprima el botón ascendente o descendente para la selección) Seleccione el canal...
  • Page 14: Getting Started

    Getting Started Charging the NiMH Battery Pack You will need to charge the battery pack fully before initial use. For best results from your charging cycle, follow these tips: • Ensure the ambient temperature is between 41° and 104° F (5° and 40° C) while charging.
  • Page 15 Arbol de Menú de Opción del Sistema - Cierre Ocupado del Canal (oprima MODE, a continuación oprima el botón ascendente o descendente para la opción) (oprima MODE, a continuación oprima el botón ascendente o descendente para el menú deseado) (oprima MODE, a continuación oprima el botón ascendente o descendente para la selección) (Oprima MODE para graduar la selección) Arbol de Menú...
  • Page 16: Attaching And Removing The Battery Pack

    Getting Started, continued Charging the NiMH Battery Pack, continued Replace the pack with the manufacturer’s recommended model. Average battery pack life from the 1600 mAh battery is10+ hours. This service time is calculated using 90% standby, 5% transmit and 5% receive time and 5W operation.
  • Page 17: Installing The Belt Clip

    Arbol de Menú de Opción del Sistema - Graduación Beep (oprima MODE, a continuación oprima el botón ascendente o descendente para la opción) (oprima MODE, a continuación oprima el botón ascendente o descendente para el menú deseado) (oprima MODE, a continuación oprima el botón ascendente o descendente para la selección) (Oprima MODE para graduar la selección) Arbol de Menú...
  • Page 18: Radio Operation

    Radio Operation Power On / Transmit Power on the radio by turning the power / volume control clockwise out of detent. You will hear a confirmation tone on power-up. To check the radio volume, press and hold the monitor button then rotate the control to desired volume level.
  • Page 19: Radio Functions

    PL5164 can be programmed to look for tones. Scan Modes Scanning is a Dealer programmable feature that allows you to monitor a number of channels or channels within a Group. Your Midland Radio Dealer will help you define a scanning mode and your channel "scan list".
  • Page 20: Priority Scan Tx

    Radio Functions, continued Priority Scan TX A single channel may be programmed as the "Priority" channel. Priority channel activity takes precedence over all other conversations. During the scan mode, if a P-T-T is initiated, the radio will transmit on the Priority channel.
  • Page 21: Nuisance Delete

    10 seconds to 990 seconds. Time-Out-Timer Penalty (TX Inhibit) When time-out-timer is applied, transmission will be inhibited after the time- out-time time expires. This TX inhibit time can be selected and programmed by your Midland Radio Dealer from 1 second to 100 seconds.
  • Page 22: Battery Save

    Radio Functions, continued Time-Out-Timer Penalty (TX Inhibit), continued For instance, when the time-out timer is set to 3 minutes and T-O-T penalty is set to 5 seconds, if you continuously transmit for 3 minutes, the radio will stop transmitting. A tone will sound with each P-T-T bar press until the 5 second TX inhibit time expires.
  • Page 23: Two-Tone Decode

    Two-Tone Decode Each channel can be programmed with two-tone decode selections: Individual Call, Group Call and Super Group Call. Your Midland Radio Dealer can program your radio(s) for this feature. To activate or reset the two-tone decode, press and hold the up button for 3 seconds. After two-tone is decoded, LED will flash red then green.
  • Page 24: Power On

    Mode Operation..., continued functions. NOTE: All functions are activated or turned off by pressing the MODE button. Use the up or down buttons to toggle through the choices available with each function. To exit, press the MODE or P-T-T buttons. Power On Power on the radio by turning the power / volume control knob clockwise out of detent.
  • Page 25: Channel Option View

    Menú de Graduaciones de Opción del Sistema Para entrar el Menú de Graduaciones de Opción del Sistema, oprima y suelte el botón de MODO durante el modo receptor o auxiliar, a continuación use los botones ascendente o descendente hasta que aparezca .
  • Page 26 Channel Option Settings Menu, continued The Channel Options Settings menu and sub-menus are detailed on the next few pages Turn radio channel selector to desired channel. Press the MODE button and then the up or down button until appears. Press and release the MODE button to select.
  • Page 27 Arbol de Menú de Opciones de Canal - Búsqueda de Prioridad (oprima MODE, a continuación oprima el botón ascendente o descendente para la opción) (oprima MODE, a continuación oprima el botón ascendente o descendente para el menú deseado) (oprima MODE, a continuación oprima el botón ascendente o descendente para la selección) (Oprima MODE para graduar la selección) Channel Option Settings Menu, continued...
  • Page 28 Channel Option Settings Menu, continued If you choose the DCS tone code setting, you will need to use the up or down buttons to select the desired tone code of 105 available. If you choose DCS code 023, your display will read: If you choose DCS code 754, your display will read: When the desired DCS tone code appears on the display,...
  • Page 29 Arbol de Menú de Opciones de Canal - Graduaciones de Tono (oprima MODE, a continuación oprima el botón ascendente o descendente para la opción) (oprima MODE, a continuación oprima el botón ascendente o descendente para el menú deseado) (oprima MODE, a continuación oprima el botón ascendente o descendente para el submenú...
  • Page 30 Channel Option Settings Menu, continued To set the per-channel radio transmit output power, press and release the MODE button, then the up or down buttons until appears. Press the MODE button to select. Scroll through the sub-menu settings with the up or down buttons, press the MODE button when appears.
  • Page 31 Menú de Graduaciones..., continuado deseada aparece en la pantalla, oprima el botón MODE para seleccionar. La radio almacena su selección On u Off para el canal corriente, y retorna al modo auxiliar. NOTA: Su radio búsquedas sólo canales con la graduación de búsqueda en "On".
  • Page 32 Off selection for the current channel and return to standby mode. NOTE: Individual, Group and Super Group frequencies and timing are programmed by your Midland Radio Dealer. For quick reference, the next few pages detail the Channel Options Menu, sub-menus and their settings.
  • Page 33: Channel Option Menu Tree

    Menú de Graduaciones..., continuado Si usted selecciona el código 754 IDCS, su visualizador lee: Cuando aparece el código deseado de tono IDCS en el visualizador, seleccione y gradúe su selección oprimiendo el botón de MODE o el P-T-T. La radio almacena su selección y retorna al modo auxiliar.
  • Page 34 Channel Option Menu Tree - Output Power (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu) (press MODE, then press up or down button to selection) (Press MODE to set selection) Channel Option Menu Tree - Normal Scan (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu)
  • Page 35 Menú de Graduaciones..., continuado Cuando aparece el código deseado de tono CTCSS en el visualizador, seleccione y gradúe su selección oprimiendo el botón de MODE o el P-T-T. La radio almacena su selección y retorna al modo auxiliar. Tabla de Frecuencia de Señalización de Tono CTCSS No.
  • Page 36: System Option Settings Menu

    System Option Settings Menu To enter the System Option Setting Menu, press and release the MODE button during the receive or standby mode, then use the up or down buttons until the above option with a press and release of the MODE button.
  • Page 37 Menú de Graduaciones de Opción de Canal NOTA: Estas instrucciones de graduación son por canal. Usted debe repetir para todos los canales. Para entrar la graduación del Menú, oprima y suelte el botón de MODE durante el modo receptor o auxiliar. En la graduación del menú, use los botones ascendentes o descendentes para pasar a través de las graduaciones de las subgraduaciones.
  • Page 38 System Option Settings Menu, continued selection and return to standby mode. Example of display: NOTE: In the Time-Out-Timer Penalty sub-menu, if “Off” is selected by pressing the MODE button, the TOT Penalty function will be disabled, and the radio will return to standby mode.
  • Page 39 Funciones del Radio, continuado Banco de Canales “Channel Bank” Con la programación especial por su Distribuidor, su radio es capaz de 16 canales adicionales para un total de 32. Si la radio está programada para una capacidad de más canales, oprima y mantenga oprimido el botón por 3 segundos.
  • Page 40 System Option Settings Menu, continued If you select the Scan Delay setting, you will need to choose the scan delay time, from 1 seconds to 30 seconds. Use the up or down buttons to select the desired time, then the MODE button to select. The radio will save your selection and return to standby mode.
  • Page 41 Funciones del Radio, continuado Expiración de Tiempo del Temporizador (T-O-T) El objeto de enviar la señal de expiración de tiempo del temporizador es evitar que cualquier persona pueda usar un canal durante un largo período de tiempo. El tiempo del temporizador puede ser programado desde 10 segundos hasta 990 segundo.
  • Page 42 System Option Settings Menu, continued press the MODE button to select. Repeat through these steps to set the other Power Save function times. Example of a display for each of these settings: On time); (Power Save Off time); and (Power Save Delay time). NOTE: Your choice of Power Save Off (not having power save) and Power Save Off time (the amount of time which power save stays off before re-activating) are set with two...
  • Page 43 Funciones del Radio, continuado Búsqueda Normal de Canales, continuado búsqueda, si se apaga el radio y se vuelve a encender, el radio retornará al modo de búsqueda hasta que se cambie un canal. Búsqueda TX de Prioridad Puede programarse un canal único como canal de "Prioridad".
  • Page 44: System Option Menu Tree

    System Option Menu Tree - Beep Setting (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu) (press MODE, then press up or down button to selection) (Press MODE to set selection) System Option Menu Tree - VOX Setting (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu)
  • Page 45 Operación del Radio Encienda / Transmite Encienda el radio dando vuelta a la derecha al botón de control de volumen. Oirá un tono de confirmación. Chequear el volumen del radio, presionando y manteniendo el botón de monitoreo, entonces gire el control más allá...
  • Page 46 System Option Menu Tree - Busy Channel Lockout (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu) (press MODE, then press up or down button to selection) (Press MODE to set selection) System Option Menu Tree - Marked Idle (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu)
  • Page 47 Preparación, continuado Cargador de Batería de NiMH, continuado Reemplace la batería con un modelo recomendado por el fabricante. La media vida de la batería de 1600 mAh son 10+ horas más o menos. Este servicio se calcula utilizando un 90% estado de espera, un 5% de tiempo de transmitir y un 5% de tiempo de recibir y la operación 5W.
  • Page 48 System Option Menu Tree - Priority Scan (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu) (press MODE, then press up or down button to selection) select channel (Press MODE to set selection;...
  • Page 49 Preparación Cargador de Batería de NiMH Necesitará cargar la batería totalmente antes de su uso inicial. Para mejores resultados de su ciclo de carga, siga estas puntas: Asegurar que la temperatura del ambiente es entre • 41 y 104° F (5 y 40° C) mientras se está cargando. Temperaturas fuera de este rango no dejan cargar totalmente la batería.
  • Page 50 System Option Menu Tree - Clear-To-Talk (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu) (press MODE, then press up or down button to selection) (Press MODE to set selection) System Option Menu Tree - Roger Beep (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu)
  • Page 51: Display Option Settings Menu

    Botones del Control del Radio..., continuado H . Control de la potencia y volumen, situado en el panel superior del radio - Enciende y ajusta el volumen del radio. I . Botón de busqueda, situado en el frente del radio. J.
  • Page 52: (Includes Channel Display And Slide Settings) Display Option Menu Tree

    Display Option Menu Tree - Channel Display (press MODE, then press up or down button to option) (press MODE, then press up or down button to desired menu) (press MODE, then press up or down button to desired sub-menu) (Press MODE (Press MODE (Press MODE to view name)
  • Page 53: Compatible Accessories

    Información de Desempaque Con cuidado, desempaque el radio y su accesorios. Use la lista de artículos de abajo para identificar los componentes incluídos en el paquete del producto para asegurar que no se deseche ningún artículo en los materiales del embalaje. Radio Antena Batería de NiMH...
  • Page 54: Licensing And Service Information

    It is recommended that you return your radio to a qualified radio communi- cations Dealer for any service or repairs. Maintenance Your Midland radio is designed to be maintenance free. To keep it in good working condition: • Clean external surfaces with a clean cloth dampened in a solution of dishwasher detergent diluted in water.
  • Page 55: Software Copyrights

    Furthermore, the purchase of Midland products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Midland Radio Corporation, except for normal non-exclusive, royalty-free license to use...
  • Page 56: Warranty Statement

    Warranty Statement Midland Radio Corporation (herein Midland), warrants each new radio product manufactured or supplied by it to be free from defects in material and workmanship under normal use and service for the time period listed below, provided that the user has complied with the requirements stated herein.
  • Page 57: Fcc - Para Uso Ocupacional Solamente

    Requerimientos de Cumplimiento con Exposición RF de FCC - Para Uso Ocupacional Solamente La Comisión Federal de Comunicaciones (FCC), con su acción en Expediente General 93-62, 7 de Noviembre, 1997, ha adoptado un estándar de seguridad para exposición humana a Frecuencia Radial (RF) energía electromagnética emitida por equipo regulado por la FCC.
  • Page 58: Precaucion Radio Vhf (Pl5161)

    Contenido Requerimientos de Cumplimiento con Exposición RF de FCC - Para Uso Ocupacional Solamente... 53 PRECAUCION Radios VHF y UHF (PL5161 / PL5164)... 53 PRECAUCION Radio VHF (PL5161)... 54 PRECAUCION Radio UHF (PL5164)... 54 Acerca de Topaz3 ... 55 Acerca de Legacy ProLine Radio...55 Información de Desempaque...

This manual is also suitable for:

Proline pl5164

Table of Contents