Vivitar DVR 783HD User Manual page 31

SLIDE SHOW...
You can view a Slide Show of all the pictures taken with your camcorder while in Playback Mode.
The 'Slide Show' menu allows you to set the interval length of time that each picture will display
during the Slide Show.
The Slide Show menu appears active only when a photo is selected in Playback Mode.
This feature is not available for video files.
The 'Slide Show' menu options include:
 Start
Select 'Start' to begin the Slide Show of your captured photos.

Select 'Interval' to set the interval length of time that each picture displays during
Interval
the Slide Show. The interval length time options include 1 sec (Default) to 10
seconds.
NOTE: Press the POWER button to toggle between the interval length options.

Select 'Repeat' to loop the Slide Show or play it only once.
Repeat
The Repeat options include
- 'No' (Default) – Plays the Slide Show once.
- 'Yes' - Plays the Slide Show continuously. To stop the looping of the Side Show,
press the OK button.
NOTE: Press the POWER button to toggle between the Repeat options.
CAMCORDER SETTING MENUS
To open the settings for the camcorder:
1. Press the OK (Menu/Set) button while in any mode.
2. The default menu displays the current Mode menu with the current Mode menu icon
(Photo Capture, Video Capture, or Playback) highlighted.
To change to the camcorder setting menus quick press the POWER button. The
camcorder settings menu icon appears highlighted.
NOTE: Before pressing the Power button to change menus, make sure that the Mode
icon on top is selected and not one of the Mode menu options. If a Mode menu option is
selected, use the Up button to highlight the top Mode menu icon and then quick press the
30