Lcd Display; Controls - Midland NAUTICO 1 NT1 SERIES Owner's Manual

Model NT1 Series

LCD DISPLAY

1
2
3
4

CONTROLS

10
NAUTICO
11
VHF MARINE
12
MENU
MIC
13
14
Page 5
15
16
17
18
MON
SCAN
19
1. VOX ICON - Indicates when eVOX
mode is active.
2. TRANSMIT (TX) ICON - Indicates
radio is transmitting a signal.
5
3. LOW BATTERY ICON - Indicates
battery level is low.
6
4. CHANNEL NUMBER - Changes from
1~88a on VHF Marine band (1~10 on
7
WX band).
5. USA/CAN/INT CHANNEL ICONS
8
6. KEY LOCK ICON - Indicates KEY
LOCK mode is on.
9 7. WX BAND ICON - Indicates when the
radio is in Weather Band mode
8. TRANSMIT POWER LEVEL (Hi / LO)
ICON - Indicates TX Power setting.
9. RECEIVE (RX) ICON - Indicates radio
is receiving a transmission.
10. POWER/VOLUME KNOB - Turn clock
wise to turn the power on and increase
the volume level. Turn counter-clockwise
to decrease the volume level and turn the
power off.
11. PTT Button - Press and hold to transmit
voice communication. Press twice quickly
to send a call tone.
12. CH 9/16 Button - Press to switch immedi
ately to emergency channel 16. Press and
hold to switch to Channel 9.
13. MIC - Built-in microphone.
14. SPEAKER - Built-in speaker.
15. ANTENNA.
16. EXTERNAL SPEAKER/MIC JACK.
17. MENU Button - Press to access MENU
mode. Press and hold to go to WX Band
Receiver mode.
18. MONITOR/SCAN Button - Press to
enter SCAN mode. Press and hold to
enter MONITOR mode.
19. UP/DOWN Button - Make adjustments
in MENU mode.
www.midlandradio.com
®