Navman EZY260LMT User Manual page 62

Device
If you want to...
delete the saved information on your
Navman,
restore factory default settings,
reset the GPS,
record a GPS log of your trip,
Demo
If you want to...
enable a shop demonstration of the
navigation feature to be played,
enable the screen saver feature on your
Navman,
Then...
tap Delete saved information:
ƒ Tap Delete My Places and tap Yes when the
warning dialog box displays. The data saved in My
Places will be deleted.
ƒ Tap Delete recent locations and tap Yes when
the warning dialog box displays. The data of recent
locations will be deleted.
ƒ Tap Delete planned trips and tap Yes when
the warning dialog box displays. The planned trips
saved on your Navman will be deleted.
ƒ Tap Delete phone data and tap Yes when the
warning dialog box displays.
tap Restore factory defaults. When the warning
dialog box displays, tap Yes. Your Navman will restart.
This option allows you to restore default factory
settings; the recent locations, saved My Places
destinations and My Drive profile on the device will be
deleted.
tap Reset GPS. When the warning dialog box
displays, tap Yes.
Note: Occasionally, the GPS fix may need to be reset. This
may occur if the receiver has been transported a long distance
since last being used; for example, to a different country, and
is still trying to establish the previous position.
tap GPS logging to turn it on.
Then...
select a demonstration country from the list and tap
Start.Tap OK. Your Navman will restart.
When your Navman is in Shop demo mode, you will
see the navigation demonstration of the pre-defined
route without having to set a destination.
Note: You cannot operate your Navman properly in Shop
demo mode.
tap Screen Saver Video.
When your Navman is idle for 10/30/60 minutes, the
screen saver will display.
61