Setting The Alarm - Yamaha TSX-B235D Owner's Manual

Setting the alarm

Setting the alarm time and alarm type
The alarm will not function when the unit is in ECO standby. To use the alarm function, set the rear panel CLOCK switch to the ON position
(☞ P. 3).
1
2
3
Alarm time
9 : 1 2
C o m p l e t e d !
Alarm indicator
1 Press SET.
The alarm indicator (
2 Set the alarm.
Set items 1 - 5 described below.
Press –/+ to select a numerical value, and press ENTER to confirm it.
Items
ALARM SELECT
1
2 ALARM TIME
ALARM TYPE
3
4 ALARM SOURCE
(If you selected
SOURCE+BEEP or
SOURCE as the
alarm type)
ALARM VOLUME Specifies the volume (5-60) of the alarm.
5
*1 If you choose RESUME when specifying the track/folder/preset number, the last-
played track/folder/station will be played (resume playback)
3 Complete the settings.
When you set the VOLUME for item
"Completed!" and your settings will be confirmed.
The alarm will be turned on and the alarm indicator (
• By pressing SET during this procedure, you can confirm the alarm settings with the
currently-specified values and complete the procedure.
• If you decide to cancel alarm settings mid-way through the procedure, press
USING THE ALARM FUNCTION (IntelliAlarm)
) will blink.
Setting or range
* This can be selected after you've used "DTA
CONTROLLER" to set the alarm (☞ P. 21). If you're not
using "DTA CONTROLLER," proceed to item
ONE DAY: An alarm that sounds only once at the
specified time.
WEEKLY: An alarm whose time can be specified for
each day of the week (settable only using
"DTA CONTROLLER").
If you've chosen WEEKLY, this completes the alarm
setting.
Make settings in the order of hours
Select from SOURCE+BEEP, SOURCE or BEEP. For
details, refer to "3 types of alarms" (☞ P. 18).
If you selected BEEP, proceed to item
CD: Play back music from a CD.
Specify the track number (data CD: folder
*1
number) (RESUME
USB: Play back music from a USB device.
Specify the folder number (RESUME, 1-999).
DAB/FM: Play a DAB/FM station.
Specify the preset number (RESUME,
1-30).
If the selected source cannot be played back at the time set
for the alarm, the beep sound is played back.
5 , the display will indicate
2
.
minutes.
5
.
, 1-99).
) will light.
.
19
En