Asus Desktop PC T2-AE1 User Manual page 87

USB Configuration USB Configuration
USB Configuration USB Configuration USB Configuration
The items in this menu allow you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
USB Configuration
USB Devices Enabled: None
Onboard SiS USB1.1 Device
Onboard SiS USB2.0 Device
Legacy USB Support
USB 2.0 Controller Mode
Stop EHCI HC in OHCI handover
U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d
The U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d item shows the auto-detected values. If
no USB device is detected, the item shows N o n e
Onboard SiS USB1.1 Device [Enabled] Onboard SiS USB1.1 Device [Enabled] Onboard SiS USB1.1 Device [Enabled]
Onboard SiS USB1.1 Device [Enabled] Onboard SiS USB1.1 Device [Enabled]
Allows you to enable or disable the onboard SiS USB 1.1 controller.
Configuration options: [Enabled] [Disabled]
Onboard SiS USB2.0 Device [Enabled] Onboard SiS USB2.0 Device [Enabled]
Onboard SiS USB2.0 Device [Enabled] Onboard SiS USB2.0 Device [Enabled] Onboard SiS USB2.0 Device [Enabled]
Allows you to enable or disable the onboard SiS USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto] Legacy USB Support [Auto]
Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto]
Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to Auto allows the system to detect the
presence of USB devices at startup. If detected, the USB controller legacy
mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]
Stop EHCI HC in OHCI handover [Enabled] Stop EHCI HC in OHCI handover [Enabled] Stop EHCI HC in OHCI handover [Enabled]
Stop EHCI HC in OHCI handover [Enabled] Stop EHCI HC in OHCI handover [Enabled]
Allows you to enable or disable the enhanced host controller interface
(EHCI) hand-off support. Configuration options: [Disabled] [Enabled]
A S U S T 2 - A E 1 A S U S T 2 - A E 1 A S U S T 2 - A E 1 A S U S T 2 - A E 1 A S U S T 2 - A E 1
[Enabled]
[Enabled]
[Auto]
[HiSpeed]
[Enabled]
N o n e. N o n e N o n e
N o n e
Enables USB host
controllers.
5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3