Cooling System - Chevrolet camaro 2016 Owner's Manual

Hide thumbs Also See for camaro 2016:
Table of Contents

Advertisement

252
Vehicle Care
2. Disconnect the electrical
connector (2).
3. Remove the four screws (3)
and lift the cover assembly.
4. Inspect or replace the air
cleaner/filter.
5. Reverse Steps 1 4 to reinstall
the housing cover and
reconnect the electrical
connector to the sensor.
6.2L V8 LT1 Engine
1. Air Duct Clamp
2. Electrical Connector
3. Screws
1. Loosen the air duct clamp (1).
2. Disconnect the electrical
connector (2).
3. Remove the five screws (3)
and lift the cover assembly.
4. Inspect or replace the air
cleaner/filter.
5. Reverse Steps 1 4 to reinstall
the housing cover and
reconnect the electrical
connector to the sensor.
Warning
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.
Caution
If the air cleaner/filter is off, dirt
can easily get into the engine,
which could damage it. Always
have the air cleaner/filter in place
when you are driving.

Cooling System

The cooling system allows the
engine to maintain the correct
working temperature.
3.6L V6 LGX Engine
1. Engine Coolant Surge Tank
and Pressure Cap

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Camaro 2017

Table of Contents